Spigot Extension - Polo 6R/TT 8N etc. (sold as singles)

Vagbremtechnic 57.1mm Hub Spigot Extender

Upgrade your Polo 6R/TT 8N wheel setup with the Vagbremtechnic 57.1mm Hub Spigot Extender. Please note: This product is strictly sold as a single unit, not as a pair. When you fit thin wheel spacers (usually below 10mm), they are often not hubcentric. This means there is very little, or sometimes zero, wheel contact directly with the hub for weight transfer. Because of this, the entire weight of your vehicle ends up going straight through the wheel bolts, which can cause dangerous stress and high-speed vibrations.

By installing spigot extenders, they tightly fit into your OE hub and physically extend the hub length. This guarantees flush wheel-to-hub contact is made. 

Key Features & Benefits

• Single Unit Supply: Sold conveniently as a single (x1) unit so you can buy the exact amount needed for your specific vehicle setup.
• Fixes Non-Hubcentric Spacers: Perfect for running wheel spacers below 10mm, curing wheel vibration issues at motorway speeds.
• Safe Weight Transfer: Extends the physical hub length to ensure the heavy weight of the vehicle is transferred safely through the hub, completely relieving stress on the wheel bolts.
• Precision Fitment: Engineered for a highly exact, tight fit directly into your OE 57.1mm vehicle hub for maximum structural rigidity.

Fitment & Installation Details

These spigot extenders are primarily designed for front vehicle hubs, but they may successfully fit some rear hubs. We strongly recommend that you visually check your vehicle's rear hub design before ordering. Because these extenders are manufactured to have a very tight, flush fit into the OE hub, proper installation is critical. You must perform a thorough cleaning of the vehicle hub prior to installation to ensure it seats perfectly flat.

Compatibility & Specifications

Below are the technical details and core specifications for this Vagbremtechnic hub accessory.